| Annual
Service |
All
prices include installation except as noted |
A.G.C.
Price |
| ksoz |
K
80 / K 20 annual spring overhaul, lube, test fire |
$175.00 |
| ksoz |
K
32 annual spring overhaul, lube, test fire |
$175.00 |
| kfpkz |
K
80 or M 32 firing pin kit - (4 firing pins & 2 return
springs) |
$90.00 |
| ksoz |
KX
5 / KS 5 annual spring overhaul, lube |
$100.00 |
| c&oz |
Service
Check, lube (clean
& oil) |
$40.00 |
| |
Perazzi,
Browning, Winchester, Beretta, Rizzini,Zoli etc. |
P.
O. R. |
| Action
Work |
All
prices include installation except as noted |
A.G.C.
Price |
| olbz |
Perazzi
oversize locking bolt on O/U |
$250.00 |
| olbz |
Perazzi
oversize locking bolt on Single bbl |
$250.00 |
| olbz |
KS
5 or KX 5 oversize locking bolt |
$225.00 |
| olbz |
Other
guns oversize locking bolt |
P.
O. R. |
| pzez |
Perazzi
replace ejector - top or bottom O/U |
$200.00 |
| pzez |
Perazzi
replace ejector - Single bbl |
$200.00 |
| pzhz |
Perazzi
hammer top or bottom O/U |
$155.00 |
| pzhz |
Perazzi
hammer single bbl |
$155.00 |
| rhz |
Labor
cost to prep new release hammer (plus cost of hammer) |
$75.00 |
| cssuz |
K
80 coil sear spring update (pull) |
$325.00 |
| cssuz |
K
80 coil sear spring update (single release) |
$350.00 |
| cssuz |
K
80 coil sear spring update (double release) |
$375.00 |
| k80hz |
K
80 hammers (warrenty part free) labor only (release extra) |
$50.00 |
| k80az |
k
80 axel (warrenty part free) labor only |
$50.00 |
| k80ez |
K
80 ejectors (warrenty part free) labor only |
$50.00 |
| kxez
- ksez |
KX
5 or KS 5 ejector (warrenty part free) labor only |
$50.00 |
| cssuz |
M
32 coil sear spring update (pull) |
$425.00 |
| cssuz |
M
32 coil sear spring update (single release) |
$425.00 |
| cssuz |
M
32 coil sear spring update (double release) |
$425.00 |
| m32ez |
Krieghoff
M 32 replace ejector - top or bottom |
$200.00 |
| m32hz |
Krieghoff
M 32 hammers top or bottom |
$225.00 |
| k80gtz |
K
80 type gold adj. Trigger w/ new axle in M 32 krieghoff-exch. |
$500.00 |
| k80fpkz |
K
80 or M 32 firing pin kit - (4 firing pins & 2 return
springs) |
$90.00 |
| tfgz |
Test
fire gun |
$10.00 |
| |
Browning,
Winchester, Beretta, Rizzini, Zoli etc. |
P.
O. R. |
| Barrel
Work |
All
prices include installation except as noted |
A.G.C.
Price |
| pbz |
Port
Single Barrel |
$75.00 |
| pbz |
Port
O/U Barrels (both bbls) |
$150.00 |
| ocz |
Open
Choke & Polish (chrome extra $20) |
$75.00 |
| poiz |
Pattern
Barrel for point of impact |
$30.00 |
| bbz |
Back
bore Barrel (micro-hone)(chrome extra $35) |
$145.00 |
| lfcz |
2
1/2 " Long Forcing Cone (chrome extra $20) |
$75.00 |
| lfcz |
4"
Long Forcing Cone |
$85.00 |
| lfcz |
6"
Long Forcing Cone (single barrels only) |
$95.00 |
| wbz |
Rebuld
Hinge Pin Area to correct headspace |
$200.00 |
| wbz |
Weld
Barrel Monoblock Rails to Tighten Top Cap (reblue extra) |
$150.00 |
| rblz |
Replace
Barrel Lug (reblue extra) |
$150.00 |
| rsz |
Replace
Front or Middle Sight |
$30.00 |
| rsz |
Drill
& Tap for Sight - sight extra |
$35.00 |
| jgz |
Jewel
Breech Face |
$100.00 |
| jgz |
Jewel
Monoblock & Ejectors |
$150.00 |
| fbz |
Fit
barrels to action ($25 to $200 priced by time spent) |
P.O.R. |
| Metal
Finishing |
All
prices include installation except as noted |
A.G.C.
Price |
| rbgz |
Polish
& Blue O/U or Unsingle Gun (hand polish no machine) |
$450.00 |
| rbgz |
Polish
& Blue Receiver & Forend Iron only (hand polish ) |
$300.00 |
| rbbz |
Full
Polish & Blue O/U Barrels only (hand polish no machine) |
$250.00 |
| rbbz |
Full
Polish & Blue Single Barrel only (hand polish no machine) |
$200.00 |
| rbbz |
Full
Polish & Blue O/U or single bbls (slow rust) |
$300.00 |
| rbbz |
Spot
Polish & Blue O/U or Single barrel |
$175.00 |
| rbpz |
Blue
Top Cap or Trigger Guard only |
$50.00 |
| rbpz |
Blue
complete perazzi trigger assembly |
$85.00 |
| npgz |
Nickel
Plate receiver & forend iron |
$400.00 |
| |
Glass
bead & Blueing bbl or receiver |
P.O.R. |
| gppz |
24K
gold plate trigger or barrel band etc. |
$50.00 |
| Trigger
Work |
All
prices include installation except as noted |
A.G.C. Price
|
| rtz |
Release
Trigger most guns (per bbl) |
$350.00 |
| rtz |
Release
Trigger K 80 or M 32 - per
bbl (factory type) |
$400.00 |
| rortz |
Release
Trigger K 80 or M 32 per bbl (NEW ROLLER STYLE) |
$495.00 |
| rortz |
Release
Trigger Beretta O/U per bbl
(NEW ROLLER STYLE) |
$495.00 |
| rortz |
Release
Trigger Browning BT 100 (NEW ROLLER STYLE) |
$495.00 |
| |
Release
Trigger Browning o/u (not cynergy) (new roller style) |
$495.00 |
| rtz |
Release
Trigger Perazzi O/U (per bbl) (OLD
STYLE) |
$350.00 |
| rtz |
Release
Trigger Perazzi single barrel trigger (OLD STYLE) |
$350.00 |
| rortz |
Release
Trigger Perazzi per bbl (NEW ROLLER STYLE) |
$495.00 |
| rortz |
Release
Trigger Zoli per bbl (NEW ROLLER STYLE) |
$495.00 |
| |
Release
Trigger Blaser per bbl |
$395.00 |
| rtz |
Release
Trigger KX 5 or KS 5 |
$350.00 |
| tsz |
K
80 or M 32 trigger stop (stops overtravel) |
$50.00 |
| rhz |
Labor
cost to prep new release hammer (plus cost of hammer) |
$75.00 |
| k80gtz |
K
80 type gold adj. Trigger w/ new axle in M 32 krieghoff-exch. |
$500.00 |
| atz |
Competition
Tuned Trigger - Pulls (per bbl) |
$75.00 |
| atz |
Competition
Tuned Trigger - releases (per bbl)(our release) |
$75.00 |
| |
Remington
M 32 Conversion to K 80 gold Trigger assembly |
$1,800.00 |
| atz |
Adjust
Trigger for 2nd shot (Inertia triggers) |
$75.00 |
| Wood
Work |
All
prices include installation except as noted |
A.G.C.
Price |
| acz |
Adjustable
Comb (round button style) |
$195.00 |
| acz |
 Adjustable
Comb (new solid plate K 80 style) any stock |
$295.00 |
| stz |
Soft
top on adjustable comb |
$100.00 |
| acz |
Extra
aditional soft top piece |
$200.00 |
| gabz |
Graco
Adjustable Back |
$200.00 |
| gabz |
Graco
GraCoil Adjustable back w/ length of pull |
$350.00 |
| ccbz |
Counter
Coil Back |
$225.00 |
| rpz |
Recoil
Pads & Install (spacers $10 extra) |
$95.00 |
| csz |
Cut
off stock for LOP or pitch (refitting pad extra) |
$20.00 |
| jaz |
Jones
Stock Adjuster |
$125.00 |
| rrz |
Recoil
Reducer & installed |
$95.00 |
| rrz |
Install
customers Recoil Reducer |
$60.00 |
| rpz |
Install
customers Recoil Pad |
$60.00 |
| bsz |
Hot
Oil Bend Stock |
$195.00 |
| rwz |
Refinish
Stock & forend (satin)(recut checkering $250 extra) |
$400.00 |
| rwz |
Refinish
Stock only (satin)(recut checkering $150 extra) |
$250.00 |
| rwz |
Refinish
Forend only (satin)(recut checkering $100 extra) |
$150.00 |
| rwz |
High
Gloss Finish on stock & forend extra |
$200.00 |
| cwz |
Checker
new stock & forend (standard checkering) |
$350.00 |
| cwz |
Checker
cheeks on stock (standard checkering) |
$100.00 |
| rwz |
Repair
wood (price varies by time spent) |
P.O.R. |
| cwz |
Custom
checkering |
P.O.R. |
| cowz |
Custom
offset wood (to customers dim.) |
P.O.R. |
| |
Gun
Nuts to change recoil pad |
$35.00 |
| |
|
|
| |
|
|
